Remote Controller Accessories Tablet Holder Mount for DJI/EVO II/FIMI X8SE 2020 Drone,DJI Accessories Set,Extended Control Phone Clip with Lanyard(Smartphone/Ipad/Tablet,1281100)

No Disassembly The first foldable DJI / EVO II / FIMI X8SE 2020 tablet holder mount on the market, after installation, it can be directly folded on the remote control, and there is no need to install it next time. Very convenient.Very Stable Ingeniously designed, the tablet bracket is firmly fixed to the rear of the remote control lever with double screws, even a large ipad can be clamped very firmly, without worrying about the risk of the tablet falling.
Product Dimensions ‏ : ‎ 9.91 x 9.91 x 2.29 cm; 195 Grams
Date First Available ‏ : ‎ 7 April 2023
Manufacturer ‏ : ‎ Aokicase
ASIN ‏ : ‎ B0C1SXYY22

✈【Applicable models】Specially design for DJI RC Remote Controller(DJI / EVO II / FIMI X8SE 2020 remote controller) 【Wide range of application】 Support most 7.9″-10″ inches tablet and phone.Not fit 4 inch phone or phones less than 124 mm in length
✈【Highlights】The holder is fixed on the antenna storage slot, that it will not put stress on the antenna. The holder can be adjusted above or in front of the remote controller, and can be adjusted to not cover the battery level leds or even the buttons. The adjustment range is large to meet different operating preferences.Anti-scratch & anti-slip: Anti-scratch and anti-slip silicone pad is added to the contact with the plate to protect the plate from scratching
✈【Sturdy and stable】 The holder has good supporting force and can support a weight within 1.4 b /640g. Hold the controller normally, the tablet can maintain a stable position. You can use accessories such as sunshade Product weight: 6.88 ounces /195g. Made of strong and lightweight material. Foldable design, easy to carry and store
✈【Highlights】The holder is fixed on the antenna storage slot, that it will not put stress on the antenna. The holder can be adjusted above or in front of the remote controller, and can be adjusted to not cover the battery level leds or even the buttons. The adjustment range is large to meet different operating preferences.Comfortable oblique vision: Observing tablet at an oblique angle could prevent reflections under sun
✅ No need to disassemble: After using this DJI Mini 2 tablet stand, you don’t need to remove it, it can be directly folded on the remote control, and you don’t need to install it again next time. You can use it directly Very stable: Ingeniously designed, the tablet bracket is firmly fixed to the rear of the remote control lever with double screws, even a large ipad can be clamped very firmly, without worrying about the risk of the tablet falling

£26.38

Added to wishlistRemoved from wishlist 0
Category: Tag:


Price: £26.38
(as of Feb 10, 2024 11:31:51 UTC – Details)



No Disassembly The first foldable DJI / EVO II / FIMI X8SE 2020 tablet holder mount on the market, after installation, it can be directly folded on the remote control, and there is no need to install it next time. Very convenient.Very Stable Ingeniously designed, the tablet bracket is firmly fixed to the rear of the remote control lever with double screws, even a large ipad can be clamped very firmly, without worrying about the risk of the tablet falling.
Product Dimensions ‏ : ‎ 9.91 x 9.91 x 2.29 cm; 195 Grams
Date First Available ‏ : ‎ 7 April 2023
Manufacturer ‏ : ‎ Aokicase
ASIN ‏ : ‎ B0C1SXYY22

✈【Applicable models】Specially design for DJI RC Remote Controller(DJI / EVO II / FIMI X8SE 2020 remote controller) 【Wide range of application】 Support most 7.9″-10″ inches tablet and phone.Not fit 4 inch phone or phones less than 124 mm in length
✈【Highlights】The holder is fixed on the antenna storage slot, that it will not put stress on the antenna. The holder can be adjusted above or in front of the remote controller, and can be adjusted to not cover the battery level leds or even the buttons. The adjustment range is large to meet different operating preferences.Anti-scratch & anti-slip: Anti-scratch and anti-slip silicone pad is added to the contact with the plate to protect the plate from scratching
✈【Sturdy and stable】 The holder has good supporting force and can support a weight within 1.4 b /640g. Hold the controller normally, the tablet can maintain a stable position. You can use accessories such as sunshade Product weight: 6.88 ounces /195g. Made of strong and lightweight material. Foldable design, easy to carry and store
✈【Highlights】The holder is fixed on the antenna storage slot, that it will not put stress on the antenna. The holder can be adjusted above or in front of the remote controller, and can be adjusted to not cover the battery level leds or even the buttons. The adjustment range is large to meet different operating preferences.Comfortable oblique vision: Observing tablet at an oblique angle could prevent reflections under sun
✅ No need to disassemble: After using this DJI Mini 2 tablet stand, you don’t need to remove it, it can be directly folded on the remote control, and you don’t need to install it again next time. You can use it directly Very stable: Ingeniously designed, the tablet bracket is firmly fixed to the rear of the remote control lever with double screws, even a large ipad can be clamped very firmly, without worrying about the risk of the tablet falling

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Remote Controller Accessories Tablet Holder Mount for DJI/EVO II/FIMI X8SE 2020 Drone,DJI Accessories Set,Extended Control Phone Clip with Lanyard(Smartphone/Ipad/Tablet,1281100)”

Your email address will not be published. Required fields are marked *

Remote Controller Accessories Tablet Holder Mount for DJI/EVO II/FIMI X8SE 2020 Drone,DJI Accessories Set,Extended Control Phone Clip with Lanyard(Smartphone/Ipad/Tablet,1281100)
Remote Controller Accessories Tablet Holder Mount for DJI/EVO II/FIMI X8SE 2020 Drone,DJI Accessories Set,Extended Control Phone Clip with Lanyard(Smartphone/Ipad/Tablet,1281100)

£26.38

DaMirror24
Logo
Shopping cart